Table of Contents
Advertisement
Available languages
Available languages
4.
Remove the gauges and quick
connect from the regulator.
Regulator
5.
Remove the regulator.
6.
Apply pipe sealant tape to the
nipple.
Nipple
7.
Assemble the regulator. NOTE:
Arrow indicates flow of air. Make
sure it is pointing in the direction
of air flow.
ReguLato
Connect
8.
Reapply pipe sealant to gauges
and quick connect.
9.
Reassemble gauges and quick
connect. Orient gauges to read
correctly.
10. Replace console cover.
19-ENG
N022059
Advertisement
Table of Contents
