Idler Bracket Removal - Craftsman 917.255919 Owner's Manual

O
BELTGUIDE
AND ADJUSTMENT
c. Place belt around transaxle pulley. "'V'" part of
belt should engage transaxle pulley_
d, Make sure "'V" part of belt engages "V'" idler°
e.
f.
g,
Roll belt over engine pulley,
Loosen L.H. engine pulley belt guide bolt and
swivel belt guide bolt and swivel belt guide on-
to R, Ho belt. Tighten L.H, and R.Ho belts securely
(Fig. 35)°
Release parking brake. NOTE: WHEN A NEW
BELT HAS BEEN INSTALLED, YOU MUST
CHECK BRAKE ADJUSTMENT,
IDLER
BRACKET
' LOCKWASHER
NUT
7. Idler Bracket Removal
NOTE: WHEN OPERATING TRACTOR WITHOUT
MOWER, REMOVE IDLER BRACKET FROM FRONT OF
TRACTOR.
a, Pull belt up through idler bracket and out of trac-
tor. Use lever to swing tension pulley for belt
removal
b . Remove Iockwashers and nuts from idler bracket
(Fig° 36).
FIGURE36