Advertisement
_)
To convert mower
Convertingto mulchingor rear discharging will require the
purchase of these accessories.)
To mulching
•
Place deck into the high cut position.
Remove bagger or optional rear discharge deflector.
Unhook the two (2) straps and remove discharge chute
Insert plug and handle assembly through back p_ate
and onto the mower deck chute adaptor.
Retain the plug assembly by connecting the two straps
over the handle and hook into the holes provided.
•
Replace bagger or optional rear discharge deflector to
allow mower to operate.
You are now ready to begin mulching.
To rear discharging
Place deck into the high cut position.
Remove bagger and mulching plug (if installed).
Install discharge chute through opening in backplate and
slide over deck adaptor.
Attach the chute by hooking the two straps into the holes
in the flange of the chute.
Install the discharge deflector to the backplate by screwing
the four (4) wing screws into the threaded inserts located
in the backplate.
Tighten the wing screws securely.
To bagging
Place deck into the high cut position.
Remove the rear discharge deflector or mulching plug.
Insert the disc harge chute into the opening in the backptate
and onto the mower deck adaptor.
Attach the chute to the tractor by hooking the two straps to
the flange of the chute.
install bagger into tractor.
5
55
Advertisement
