Symbols - Craftsman 973.111380 Owner's Manual

Ol/I?/02 THIT 11:52 FAX 864 964 3314 RYOBI CUSTOMER SERVICE _006/012
SYMBOLS
i
SYMBOL NAME DESIGNATIONIEXPLANATIO N
V Volts Voltage
i i_.,, ji
A Amperes Current
_=. Hz Hertz Frequency (cycles per second)
rain Minutes Time
II
"_, Altamating Current Type or a characfedstlc of current
= Direct Current Type or a characteristic of curt'eat
=1
no No Load Speed Rotational speed, at no load
..Jmln RevoJuUons or Reclprocetfen Par Minute Revolutions, strokes,
surfaco speed, orbits etc. per minute
ii ii i
,_ Safety Alert Symbo{ Indicates danger, warning or caution.
It means attentlonlll Your safety Is
involved.
i
1"hepurpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and
the explanations with them, deserve your careful attention a.d understanding. The safety wamlngs do
not by themselves eliminate any danger. The Instructions or warnings they give are not substitutes for
proper accident prevention measures.
SYMBOL MEANING
m=,
A
A
A
SAFETY ALERT SYMBOL:
Indicates danger, warning, or caution. May be used in canjunc_ion wilh other symbols or plotogmphs.
iii
DANGER: Failure to obey a safety warning will result in sedous injury to yourself or to others.
Always follow the safety prec_utioes to reduce the dsk of tim, electric shock and personal Injury_
• i i l
WARNING:
Failure to obey a safety warning can result in sedous injury to yourself or to ethers,
Always follow the safety precautions to reduce the dsk of Ere, electric shock end personal injury.
A
NOTE:
CAUTION: Failure to obey a safety warning may resuit In property damage or personal Injury to
yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock
and personal injury.
., , , ill , i .
Advises you of information or instructions vital to the operation or maintenance of the equipment.
, , ,
SAVE THESE INSTRUCTIONS
_ WARNING;
NI
The operation of any power tool can result in foreign objects being thrown Into your eyes, which can
result in severe eye damage. Before beginning power tool operation, always wear safety goggles or
safety glasses with aide shields and a full face shield when needed. We recommend Wide Vision
Safety Mask for use over eyeglasses or standard safety glasses with side shields, available at Sears
Retail Stores. Always use eye protection which is marked to'comply with ANSI Z87.1.