Dust Collection - Craftsman 320.27680 Operator's Manual

shield from the plunge base, simply loosen -Fig. 26a
the screw and take the chip shield off the
base (Fig. 26a).
_1, WARNING: The chip shield helps to keep
dust and chips away from the operator; they
will not stop objects larger than woodchips
that may be thrown from the bit.
WARNING: Always have the appropriate
chip shield in place on the base when
operating the router.
A_, WARNING: Always turn the router motor
off and unplug the router from the power source before making any adjustments
or installing accessories. Failure to turn the motor off and unplug the router
could result in accidental starting, which can cause serious personal injury.
DUST COLLECTION WITH VACUUM PORT (Figs. 27 and 27a)
Two vacuum ports are included with the router bases. Each adapter is sized to
accept a 1-1/4 in. vac hose adapter, sold
separately.
Attach the Vacuum Port onto the Plunge
Base (Fig. 27)
To attach the vacuum port onto the plunge
base, position and secure it to the back of the
base with the two thumb screws (included),
as shown in Fig. 27.
Attach the Vacuum Port onto the Fixed
Basev (Fig. 27a)
Fig. 27
To attach the vacuum port onto the fixed base, align the two tabs on the port
with the two slots on the port at back of the
base, and secure it by turning it clockwise Fig. 27a
(Fig. 27a).
27683 ManuaLRevised_11-0120 Page 34