Advertisement
•
Table of Contents .....................................................................................................................................................
2
•
General Safety Rules ............................................................................................................................................
2-3
•
Specific Safety Rules ...............................................................................................................................................
4
•
Symbols ....................................................................................................................................................................
5
•
Features ...................................................................................................................................................................
6
•
Operation .............................................................................................................................................................
7-10
•
Maintenance ...........................................................................................................................................................
11
•
Accessories ............................................................................................................................................................
12
•
Warranty .................................................................................................................................................................
12
•
Exploded View and Repair Parts List .....................................................................................................................
13
•
Parts Ordering / Service .........................................................................................................................................
14
A
WARNING:
Read and understand all
instructions.
Failure to follow all instructions
(isted below may result in electric shock, fire,
and/or serious personal injury.
SAVE THESE
INSTRUCTIONS
Work Area
•
Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
•
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
•
Keep bystanders, children, and visitors away
while operating a power tool. Distractions can
cause you to lose control.
Electrical
Safety
•
Double insulated tools are equipped with a
polarized plug (one blade is wider than the other).
This plug will fit in a polarized outlet only one
way. if the plug does not fit fully in the outlet,
reverse the plug. if it still does not fit, contact a
qualified electrician to install a polarized outlet.
Do not change the plug in any way. Double
insulation []
eliminates the need for the three-wire
grounded power cord and grounded power supply
system.
•
Avoid body contact with grounded surfaces,
such as pipes, radiators, ranges, and refrigera-
tors. There is an increased risk of electric shock if
your body is grounded.
•
Don't expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
•
Do not abuse the cord. Never use the cord to
carry the tools or pull the plug from an outlet.
2
Keep cord away from heat, oil, sharp edges, or
moving parts. Replace damaged cords immedi-
ately. Damaged cords increase the risk of electric
shock.
•
When operating a power tool outside, use an
outdoor extension cord marked "W-A" or "W."
These cords are rated for outdoor use and reduce the
risk of electric shock.
Personal
Safety
•
Stay alert, watch what you are doing, and use
common sense when operating a power tool. Do
not use tool while tired or under the influence of
drugs, alcohol, or medication. A moment of inatten-
tion while operating power tools may result in serious
personal injury.
•
Dress properly. Do not wear loose clothing or
jewelry.
Contain long hair. Keep your hair, cloth-
ing, and gloves away from moving parts. Loose
clothes, jewelry, or long hair can be caught in moving
parts.
Avoid accidental starting. Be sure switch is off
before plugging in. Carrying tools with your finger
on the switch or plugging in tools that have the switch
on invites accidents.
•
Remove adjusting keys or wrenches before
turning the tool on. A wrench or a key that is left
attached to a rotating part of the tool may result in
personal injury.
•
Do not overreach. Keep proper footing
and
balance at all times. Proper footing and balance
enables better control of the tool in unexpected
situations.
•
Use safety equipment. Always wear eye protec-
tion. Dust mask, nonskid safety shoes, hard hat, or
hearing protection must be used for appropriate
conditions.
Advertisement
