General Power Tool Safety Warnings; Work Area Safety; Battery Pack - Craftsman nEXTEC 320.30566 Operator's Manual

SAVE THESE INSTRUCTIONS
Some of these following symbols may be used on this tool. Please study them
and learn their meaning. Pro_er interlretation of these symboHs will allow you to
omerate the tool better and more safely.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Am 0eres Current
Hz Hertz Frecuency (cycles t er second)
W Wait Power
rain Minutes Time
AlternatingCurrent TyJeof current
--'_ Direct Current Type or a characteristic of current
rio No Load Steed Rotational steed, at no load
] Class II Construct on Double- nsulated coustruct}on
_./min PerMinute Revolutions,strokes, surface seeed,
orbits,
etc., ter minute
Do not extose to rain or use n damt
Wet Cond}t ons Alert local ons.
To reduce the risk of kLinry, user must
Read The O_erator's Manna_ read and undersl :rod o leratoffs manual
before using th}s troduct.
O
Always wear safety
goggles
or safety
Eye Protectiou glasses
with side shields and a full flee
shield when
ote[ tt ng
th}s eroducL
A Safety Alert Precautionsthat involve your safety.
Fa lure to keel your hands away from the
No Hands Sylnbol Node will result in serious lersona_ njury.
®
No Hands SynlbOl
No Hands Symbol
No Hands Sylnbol
Hot Surface
Fa lure teI keet your hands away from the
Uade wH result iu serious Imersonal }njury,
Fa lure to keew your hands away from Lhe
b_lde w}lt result in serious tersonaW njury,
Fa lure to keee your hands away from the
blude w}Hresult in serious _ersona_ }njury.
To reduce the risk of iniury or damage,
avoid contact wth any hot surface.
30566 ManuaLRev sed 110715 Page 4
GENERAL POWER TOOL SAFETY WARNINGS
,_ WARNING: Read and understand all instructions. Failure to follow al
instructions listed below may resuR in electric shock, fire, andTor serious
aersonal iqiury. The term "mower tool" in all of warnings listed below refers to
corded tower tools or battery-oaerated (cordless) aower tools.
Save all warnings and instructions for future reference.
WORK AREA SAFETY
• Keep your work area clean and well lit, Cluttered or dark areas invite accidents
• Do not operate power tools in explosive environments, such as in the
presence of flammable liquids, gases, or dust. Power tools create smarks,
which may i_nite the dust or fumes
° Keep children and bystanders away while operating a power tool.
Distractions may c;_use you to lose control
ELECTRICAL SAFETY
° Avoid body contact with grounded surfaces, such as pipes, radiators,
ranges, and refrigerators. There is an increased risk of electric shock if your
body is grounded.
° Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adaptor plugs with grounded power tools.
Unmodified plugs and matching outlets will reduce the risk of electric shock.
Do not expose power tools to rain or wet conditions, Water entering a
cower tool witl increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling, or
unplugging the power tool. Keep the cord away from heat, oil, sharp
edge, or moving parts. Damaged or entangled cords increase the risk of
electric shock.
When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
If operating a power tool in a damp location is unavoidable, use a
ground fault circuit interrupter (GFCI} protected supply. Use of a GFCI
reduces the risk of electric shock.
• Use only the battery arid with the chargers listed:
BATTERY PACK
320,1!22!
CHARGERS
320,14300
32029497
320,10006
30566 Manual_Revised_:!l 0715 Page 5