Battery Pack Removal And Preparation For Recycling - Craftsman nEXTEC 320.30566 Operator's Manual

• Store Lithiumqon battery lacks in a 30%-50% charged condiLion_
• Every six months of sLorage, fully charge the Lithiumqon battery lack.
• Exterior may be cleaned with a cloth or soft nonometaHic brush
BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING
I".,_I1t!1_ LId"JIll
To i,reserve natural resources, ilease recycle or disiose of batteries _roierly,
This lroduct contains lithium...ion batteries. Locan, date, or federaJ laws may
_rohibit diseosal of lithium-ion batteries in ordinary trash_ Consult your local waste
authority for information regarding availabMe recycDing and/or disposal options.
WARNING" Uion removal of the battery lack for dislosal oFrecycling,
cover the battery iack's terminals with heavyoduty adhesive tale. Do
not attem it to destroy or disassemble battery lack or remove any of its
comtonents. Lithiumqon batteries must be recycled or dis!osed of iroierly..
A_so, never touch both terminals with metal objects and!or body parts as
short circuit may rosuit. Keel away from children. Failure to corn _ly with these
warnings could resumtin fire and/or serious injury.
12 VOLT LITHIUM-ION CORDLESS MULTI-TOOL MODEL NUMBER 320,30566
The Model Number will be round on the Name wlate attached to the handle of the
MultioTool. Always mention the Model Number when ordering Áarts for this toolo
To order iarts, call 1o800o469o4663o
\
\\ /
PROBLEM CAUSE SOLUTION
The tool does not work Battery is de _:.leted Charge the battery
Motor overheating Be sure cooling vents Clean and clear vents.
are free from dust and Do not cover with hand
obstacles during o _eration
\
\
©
30566 Mat_uaLR÷,_ sedJ 1_O715 Pa_ 30 30566 ManuaLRevised 11 ©715 Pa_ 31