Advertisement
ADJUSTABLE
TORQUE
CLUTCH
The drill is equipped with an adjustable torque clutch for
driving different types of screws into different materials.
The proper setting depends on the type of material and
the size of screw you are using.
ADJUSTING
TORQUE
See Figure 6.
[] There are twenty-four
torque indicator settings located
on the front of the drill.
[] Rotate the adjusting ring to the desired setting.
•
1 - 4
For driving small screws
5 - 8
For driving screws into soft
material
9 - 12
For driving screws into soft and hard
materials
13 - 16
For driving screws into hard wood
17 - 23
For driving large screws
_11
For heavy drilling
TO DECREASE
ADJUSTING
TORQUE
RiNG
LED WORKMGHT
See Figure 7.
The LED worklight on the foot of the drill will come on
when the switch trigger is depressed. This provides addi-
tional lighting on the surface of the workpiece for opera-
tion in lower-light areas.
LED
WORKLIGHT
Fig. 7
BIT STORAGE
See Figure 8.
When not in use, bits provided with the drill can be placed
in the storage area located on the base of the drill.
TO INCREASE
TORQUE
"_
Fig. 6
SCREWDRIVER BIT(S)
BiT
STORAGE
AREA
Fig. 8
13
Advertisement
