Table of Contents
Advertisement
Emptying the Drum
I WARNING:
To reduce
the risk of
I
Injury from accidental
starting,
.
unplug power cord before emptying
the drum.
1. The vac comes equipped with a drain
for easy emptying of liquids. Simply
unscrew the drain cap and lift the oppo-
site side slightly to empty the drum.
2. Another option is to remove the power
assembly. Pull the flexible
latches out-
ward on each side of the lid to release
from the drum.
3. While holding the latches out, lift the
power assembly up and away from the
drum.
4. Lay power assembly upside down on a
clean area while emptying drum.
5. Dump the drum contents into the proper
waste disposal container.
WARNING:
To reduce the dsk of
beck Injury or fells, do not lift a vac
heavy with liqulri or debris. Scoop
or drain enough
contents
out to
make the vac light enough
to lift
comfortably.
Cord Wrap/Carry
Handle
The wet/dry
vac has a convenient
cord
wrap area/carry
handle designed
on the
rear of the vac. Simply, wrap the power
cord around the handle and snap the con-
nector on the plug to a wrap of the cord
and the cord is wrapped for storage.
Moving the Vac
1. Should it become necessary to pick the
vac up to move it, DO NOT pick the vac
up by the lid handles unless dust drum
is empty. To avoid dropping the-vac due
to latches releasing or possible part
breakage, pick the vac up by the lip of
the dust drum.
Blowing Feature
Your vac features "Full Blowing'. It can
blow sawdust and other debris. Follow the
steps below to use your vac as a blower.
,,i
i,
=,
i WARNING:
Always wear safety gog-
gles complying
with ANSI Z87.1
before using as a blower.
WARNING:
To reduce the risk of
injury to bystanders,
keep them
clear of blowing debris.
1. Locate blowing port of your vac.
2. Insert soft end of your hose into blowing
port.
3. (Optional) Attach extension wand to
swivel end of hose, then place a blower
nozzle on the wand.
4.Turn vac on and you are ready to use
your vac as a blower.
Sears recommended
accessories are
available at Sears retail stores. The Sears
Blower Nozzle Stock No. 9-16933
and
extension handles Stock No. 9-16964 are
recommended
for blowing debris.
Swivel End
Ext'en=lon
Wand
9
(Optional)
Advertisement
Table of Contents
