Craftsman 113.177600 Owner's Manual
Craftsman 113.177600 Owner's Manual

Craftsman 113.177600 Owner's Manual

12 gallon full blowing wet/dry vac

Advertisement

Quick Links

*'-Save
This Manual
TM
For Future Reference
SEARS
owner's
manual
MODEL NO.
113.177600
Serial
Number
Model and serial
numbers may be found
on the handle. You
should record both
model and serial
numbers in a safe place
for future use.
FORYOUR
SAFETY
READ ALL
INSTRUCTIONS
CAREFULLY
CRRFTSMRN
12 GALLON
FULL BLOWING
WETIDRY VAC
• assembly
• operating
• repair parts
Sears, Roebuck
and Co., Hoffman
Emtes,
IL 60179 U.S.A.
Part No. SP6150
_
Printed in U.S.A.

Advertisement

Table of Contents
loading

Summary of Contents for Craftsman 113.177600

  • Page 1 *'-Save This Manual For Future Reference SEARS owner's manual MODEL NO. 113.177600 CRRFTSMRN Serial Number Model and serial 12 GALLON numbers may be found on the handle. You FULL BLOWING should record both model and serial WETIDRY VAC numbers in a safe place for future use.
  • Page 2 FULL ONE YEAR WARRANTY ON CRAFTSMAN WET/DRY VACS If within one year from the data of purchase, this Craftsman Wet/Dry Vac fails due to a defect in matariai or workmanship, Sears will repair it, free of chan_e. If this Craftsman...
  • Page 3 oexore unplugging. moving parts. To reduce the risk of falls, use extra care To reduce the risk of injury from acciden- tal starting, unplug power cord before when cleaning on stairs. changing or cleaning filter. This Wet/Dry Vac is double-insulated, Do not unplug by pulling on cord.
  • Page 4 Introduction Owner's Manual Contents This Wet/Dry Vac is intended for house- hold use only. Item Page IMPORTANT NOTE Warranty Information ......Safety Instructions ......... Please Read Carefully Introduction ..........Static Shocks Are Common - In dry • Unpacking and Checking Carton Contents ......
  • Page 5: Float/Cage Assembly

    Float/Cage Assembly NOTE: If filter cage needs to be removed, WARNING: For your own safety, because the float is placed in the wrong never connect plug to power source outlet until all ammbly steps are way, use a slotted screwdriver and insert the blade near one of the tabs between complete and you have read and...
  • Page 6: Foot Assembly

    Caster/Caster Foot Assembly 1. Remove the power assembly from the 7. Turn the drum upright. dust drum and set aside. 2. Tqrn the dust drum upside down on the floor. 3. Insert the caster feet into the bottom of drum, as shown (4 places). 4.
  • Page 7: To Store Your Accessories

    6. Insert the soft end of the hose, which is NOTE: The swivel end of the hose is removable if more hoses need to be opposite the swivel end, intothe vac- uum port directly above the drain. attached for more length from the vac. To remove the swivel portion of the hose, 7.
  • Page 8: Operation

    Operation WARNING To reduce the risk of fire or explosion, do not operate this vac IRareas with flammable gases, vapors or explosive dust in the air. Flammable gases or vapors include but are not limited to; fighter fluid, solvent type cleaners, oil- base paints, gasoline, alcohol...
  • Page 9 Moving the Vac Emptying the Drum 1. Should it become necessary to pick the vac up to move it, DO NOT pick the vac Injury from accidental starting, up by the lid handles unless dust drum unplug power cord before emptying I WARNING: To reduce the risk of...
  • Page 10: Maintenance

    Maintenance Filter IMPORTANT," To avoid damage to the blower wheel and motor, always reinstall the filter before using the vac for dry mate- Injury from accidental starting, rial pickup. unplug power cord before changing ARNING: To reduce the risk of Dry Filter or cleaning filter.
  • Page 11 Wet Nozzle farthest from you.) _. _= _= • " _" _" I " "- -" _ To pick up liquids off a smooth surface, use the 2-1/2" wet nozzle accessory sup- plied with your wet/dry vec. To use this 2.
  • Page 12: Repair Parts

    Repair Parts 12 Gallon Wet/Dry Vac Model Number 113.177600 Always order by Part Number - Not by Key Number WARNING SERVICING OF DOUBLE-INSULATED WETIDRY In a double-insulated Wet/Dry Vac, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated appliance,...
  • Page 13 Repair Parts 12 Gallon Wet/Dry Vac Model Number 113.t77600...
  • Page 14: Accessories And Attachments

    CRAFTSMAN® Accessories and Attachments Get more versatility from your Craftsman wet/dry vacuum by adding these accesso- lies. Additional wet/dry vac accessories may be purchased at your local Sears retail store or Sears/CraRsman Power and Hand Tool Catalog. 16931116990 Caster 17820 2-112°'x7 ' Hose...
  • Page 15 16934HoseGrip 16917HoseJoiner 16930HoseLock 16935Gutter Nozzle Sawdust Collection Series Whole-shop Sawdust Manifold-Type Collection System 29964 Table Saw Dust Radial Arm Saw Collection Dust Collection 29962 29963...
  • Page 16 For the repair or replacement paols you need Call 7 am - 7 pro, 7 daysa week 1-800-366-PART (1-a00-366-7278) For in-home majorbrand repair service Call 24 hours a day,7 daysa week 1-8OO-4-REPAIR (1-800-473-7247) For tile location of a Seats Repair Service Center in your area Call 24 hoursa day,7 daysa week 1-800-488-1222 g|g||g...

Table of Contents