Table of Contents
Advertisement
CERTIFICATION
FCC Regulations
High
Frequency
Stabilized
Arc
Welding
installations
are required
to meet radio frequency
radiation
limits
given
in
the
Federal
Communications
Commission
(FCC)
Rules and
Regulations,
Part !8
Further, the FCC requires all
High
Frequency
Stabilized
Arc
Welding
installations to have certification.
Certification
may
be based upon manufacturers
tests, or upon actual
on site measurements.
If certification
is based upon manufacturers
tests,
the
manufacturer
conducts
tests
to
verify
compliance
with FCC requirements
and provides
instructions
for proper installation
and operation
of
the High Frequency
Arc Stabilizer.. When the High
Frequency
Stabilized
Arc Welder installation
has
been completed
as specified
by the manufacturer
and the equipment
is being operated in accordance
with the manufacturer's
instructions,
the user so
stipulates
by signing
a certification
form provided
by the manufacturer
If certification
is
based
upon
actuat
on
site
measurements,
the
user
is
responsible
for
conducting
radio
frequency
radiation
measurements
on the finished installation
following
procedures
outlined
in
the
FCC
Rules
and
Regulations,
Part I8
A certificate
must then be
executed
by an individual
qualified
to make and
interpret
radio frequency
radiation
measurements
The FCC requires
that the signed
certificate
be
placed
in a location
where
it
is conveniently
available
for
inspection
by
authorized
representatives
of the FCC The certificate
may be
attached
directly
to the equipment
or may be at
another location provided a notice is attached to the
equipment
stating where the certificate
is located
Certification of your Installation
This Arc
Stabilizer
has complied
with the tests
necessary
to
permit
certification
based
upon
manufacturer's
tests.
When
the
instalfation
is
completed,
the
person
responsible
for
the
installation
and operation
of the High Frequency
Stabilized Arc Welder Installation
is required to sign
the
certificate
included
in this owners
madual,
attesting
that the installation
has been made
in
accordance
with
the
instructions
given
in this
owners manual.
Responsibility
Conformance
with
FCC
requirements
is
the
responsibility
of the user and the user is required to
take steps
promptly
to remedy
any instances
of
harmful
interference
with
any
authorized
radio
service.
CERTIFICATION
OF HIGH
FREQUENCY
ARC WELDER
INSTALLATION
I HEREBY CERTIFY THAT:
I am familiar with the requirements
of Part I8 of the FCC Rules pertaining
to the operation
and
certificaton
of High Frequency
Stabilized
Arc Welders; and
If harmful
interference arises, I will take prompt steps to eliminate
the harmful interference;
and
i have installed
the equipment
in exact accordance
with the instructions
provided
in the
Owners Manual
By (signature):
Date:
9
Advertisement
Table of Contents
