Craftsman 315.105050 Owner's Manual page 2

FULL ONE YEAR WARRANTY ON CRAFTSMAN ELECTRONIC dRILL
If this Craftsman Electronic Drill fails to give complete satisfaction within one year from the date of
purchase, RETURN IT TO THE NEAREST SEARS STORE THROUGHOUT THE UNITED STATES and
Sears will repair if, free of charge.
If this electronic drill is used for commercial or rental purposes this warranty applies for only 90 days
from the date of purchase.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state fo state.
SEARS, ROEBUCK AND CO.
DEPT. 817 WA
HOFFMAN ESTATES, IL 60179
INTRODUCTION
DOUBLE INSULATION Is a concept Ill safety, in elec- IMPORTANT -- Servicing of a tool with double in-
tric power tools, which eliminates the need for the sulation requires extreme care and knowledge of the
usual three wire grounded power cord and grounded system and should be performed only by a qualified
supply system. Wherever there is electric current in service technician. For service we suggest you
the tOOl there are two complete sets of insulattan to return the tool to your nearest Sears Store for repair.
protect the user. All exposed metal parts are isolated Always use original factory replacement parts when
from the Internal metal motor components with prc- servicing.
tactlng insulation,
RULES FOR SAFE OPERATION
READ ALL iNSTRUCTIONS
1. KNOW YOUR POWER TOOL. Read owner's
manual carefully. Learn its applications and
limitations as well as the specific potential hazards
related to this tool.
2. GUARD AGAINST ELECTRICAL SHOCK by
preventing body contact with grounded surfaces,
For example; Pipes, radiators, ranges, refrigerator
enclosures.
3. KEEP GUARDS IN PLACE and in working order.
4. KEEP WORK AREA CLEAN.Cluttered ames and
benches invite accidents.
5. AVOID DANG EROUE ENVlRONM ENT.Don't use
power tool in damp or wet locations or expose to
rain. Keep work area well tit.
6. KEEP CHILDREN AND VISITORS AWAY. All
visitors should wear safely glasses and be kept a
safe distance from work area. Do not let visitors
contact tool or extension cord.
7. STORE IDLE TOOLS. When not in use tools
should be stored in e dry and high or locked-up
place - out of the reach of children.
8. DON'T FORCE TOOL. It will do the job bettar and
safer at the rate for which it was designed,
9. USE RIGHT TOOL. Don't force small tool or
attachment fo do the job of a heavy duty tool. Don't
use tool for purpose not intended - for example - A
circular saw should never be used for cutting tree
limbs or logs.
10. WEAR PROPER APPAREL. Do not wear loose
clothing or jewelry that can get caught in fool's
moving parts and cause personal injury. Rubber
gloves and non-skid footwear are recommended
when working outdoors. Wear protective hair
covering to contain long hair and keep if from being
drawn into nearby air vents.
11. ALWAYS WEAR SAFETY GLASSES. Everyday
eyeglasses have only impact-resistant lenses; they
are ROT safety glasses,
Page 2