Using The Ats Memory Feataure - Eton E5 Owner's Manual

7 WORKING WITH MEMORY continued
3. While holding down the ERASE button (15), press the F1-7 button
that you wish to erase. Note that the box surrounding the memory
location disappears.
4. Release the ERASE button.
DELETING ALL MEMORY CONTENTS
Hold down the EDIT and SSB buttons simultaneously, then press
RESET (2). This deletes the contents of all memory pages.
USING THE ATS MEMORY FEATURE
Auto Tuning Storage (ATS) automatically stores the strongest FM
local stations into memory, starting with page 99 and continuing
downward until all are stored, e.g. 99, 98, 97, etc.
To select and start ATS:
3. Hold down the F6 button for about 2 seconds, then release. Note
that the last chosen mode flashes in the screen.
4. While the mode flashes, perform quick, short presses of the F6
button to select ATS, then press the PAGE/TIME (4) button.
5. Press the Auto Tuning button for about two seconds to start the
ATS scan.
ATS NOTE: After the ATS scan, if too many memories are filled with
static, try the scan again with the DX/LOCAL switch set in the LOCAL
position.
26
E5 OWNER'S MANUAL