Cleaning Cooktop And Parts - Electrolux EI30GF55GSB Use & Care Manual

Care and Cleaning
Cleaning cooktop and parts
The cooktop is designed to make cleaning easier.
Because the gas burners are sealed, cleanups are
easier when spillovers are cleaned up immediately,
Cooktop
Ira spill occurs on or in the recessed or contoured
areas, blot up spill with an absorbent cloth. Rinse
with a clean, damp cloth and wipe dry. Do not use
harsh abrasive cleaners on the cooktop. They can
scratch the porcelain. Completely rinse any mild
cleaners used from the surface or the porcelain
cooktop may become damaged during future
heating. Do not use spray oven cleaners on the
cooktop,
Burner grates
Your appliance is shipped with the burner heads
and burner caps in the correct locations. Before
using your gas range be sure to:
• Fol[owtheinstallation instructions before
installing.
• Remove all packing tape from cooktop area.
To remove:
Should you ever need to remove the burner cap for
cleaning, simply lift the cap off the burner head.
To replace:
1, Pair up burner caps sizes with corresponding
burner heads.
2, Align burner cap ignition area to the burner head
ignition area. See illustration.
3, Place the burner cap vane slots onto the burner
head vanes.
Before using make sure the burner cap fits
flush with the burner head.