Cleaning Cooktop And Parts - Electrolux EW30DF65GBB Use & Care Manual

Care and Cleaning
Cleaning cooktop and parts
The oooktop is designed to make cleaning easier. Your range is shipped with the burner heads and
: Because the gas burners are sealed, cleanups are burner caps in the correct locations. Before using
: easy when spillovers are cleaned up immediately, your gas range make sure to:
:: Follow the installation instructions before
,nsta,,ng
• Remove all packing tape from cooktop area,
ft : _ e remove: r
::::: bnould you ever need to remove the Durner cap for
Cookto c ean ng s mp y ft the cap off the burner head
p ' .
: If a spill occurs on or in the recessed or contoured Toreplace:
areas, blot up spill with an absorbent cloth. Rinse 1. Pair up burner caps sizes with corresponding
with a clean, damp cloth and wipe dry. Do not use burner heads
harsh abras ve c eaners on the cooktop They can _
....... L.._.......... ,--.......... o._ _ ._ z, _Hgn burner cap ignlhon area to the burner nead
bb/dLbll LI i_:_ _U/b_c: d ii bUi i i_ tSLt_ jv i ilbL_ dill/ I i i U
gn tonarea See ustraton
cleaners used from the surface or the porcelain
cooktop may become damaged during future 3, Place the burner cap vane slots onto the burner
heating. Do not use spray oven cleaners on the head vanes.
cooktop. Before using make sure the burner cap fits
..... flush with the burner head,
Burner grates
The burner grates are dishwasher safe and may be Burner Cap
cleaned in the dishwasher. Remove any excessive
soils before placing in the dishwasher. I Burner cap vane slots
Burner heads & caps
To clean:
Burner cap
ignition area
Burner head vanes
i_ ! Burner head
/ignition area
Burner port
Burner Head
The ports (or slots) around the burner heads must
be routinely cleaned. If residue still remains in
these ports, use a small-gauge wire or needle to
clean the slots or holes. For proper flow of gas and
ignition of the burner-- Always keep the burner
caps in place whenever the gas burners are in use.
Double ring burner heads & caps
The glass in the double ring burner is designed to
fit loosely. Clean with normal non-abrasive glass
cleaners and thoroughly dry before replacing.