Table of Contents
Advertisement
Setting Surface Controls
SURFACE COOKING U NSILS
I
I
I
I
I
I
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
Cookware
should have flat bottoms
that make good contact with the en-
tire surface heating element.
Check
for flatness by rotating a ruler across
the bottom of cookware. Be sure to
follow the recommendations
for using
cookware that has shown in the illus-
tration at right.
GOOD
POOR
t
t
,
Fiat
bottom
and
straight
sides.
•
Tight fitting lids.
•
Weight of handle does not tilt
pan. Pan is well balanced.
•
Pan sizes match the amount of
food to be prepared and the
size of the surface element.
•
Made of material that conducts
heat well.
•
Easy to clean.
•
Always match pot diameter to
element surface diameter.
•
Curved and warped pan bot-
toms.
•
Pan overhangs unit by more
than 2.5 cm (1").
•
Heavy handle tilts pan.
•
Pan is smaller than element.
Note: Always use a cooking utensil for its intended purpose. Follow manufacturer's
instructions. Some utensils
were not made to be used in the oven or on the cooktop.
Specialty pans such as lobster pots, griddles and pressure cookers may be used but must conform to the above
recommended
cookware requirements.
Note: The size and type of cookware used will influence the setting needed for best cooking results.
COOKWA
MA R ALTYPES
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
The cookware
material determines
how evenly and quickly heat is transferred
from the
surface element to the pan bottom. The most popular materials available are:
ALUMINUM - Excellent heat conductor. Some types of food will cause it to darken (Anodized
aluminum cookware resists staining & pitting). If aluminum pans slide across the ceramic
glass cooktop, they may leave metal marks which will resemble scratches. Remove these
marks immediately.
COPPER - Excellent heat conductor but discolors easily. May leave metal marks on ceramic
glass (see Aluminum above).
STAINLESS
STEEL - Slow heat conductor with uneven cooking results. Is durable, easy to
clean and resists staining.
CAST iRON - A poor heat conductor however will retain heat very well. Cooks evenly once
cooking temperature
is reached. Not recommended
for use on ceramic cooktops.
PORCELAIN-ENAMEL
on METAL - Heating characteristics
will vary depending on base
material. Porcelain-enamel
coating must be smooth to avoid scratching ceramic cooktops.
GLASS - Slow heat conductor. Not recommended for ceramic cooktop surfaces because it
may scratch the glass.
Advertisement
Table of Contents
