Table of Contents
Advertisement
ng Surface Controls
ABOUTTHECE M(C G SS COOKTOP
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
The ceramic cooktop has radiant surface elements located below the
surface of the glass. The design of the ceramic cooktop outlines the area
of the surface element underneath. Make sure the diameter of the pan
matches the diameter of the element outline on the cooktop (See Figs. 1
&2).
Heat is transferred up through the surface of the cooktop to the
cookware. Only flat-bottom cookware should be used. The type and size
of cookware, the number of surface elements in use and their settings
are all factors that will affect the amount of heat that will spread to areas
beyond the surface elements. The areas surrounding the elements may
become hot enough to cause burns.
ABOUTTHE B(ANT SURFACEELEMENTS
Fig.1 - 30" Model - C00kt0p Appearance
Fig. 2 - 36" Model - Cooktop Appearance
[]
[]
[]
[]
[]
1
[]
[]
1
[]
[]
1
1
[]
[]
[]
1
[]
[]
[]
[]
1
The element temperature rises gradually and evenly. As the temperature rises, the element
will glow red. To maintain the selected setting, the element will cycle ON and OFF. The heating
element retains enough heat to provide a uniform and consistent heat during the OFF cycle.
For efficient cooking, turn OFF the element several minutes before cooking is complete. This
will allow residual heat to complete the cooking process.
Advertisement
Table of Contents
