Table of Contents
Advertisement
Oven Controls
SABBATHFEATURE(co.TINuED)
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
Note: You may change the oven temperature once baking has started. Press UPPER OVEN
UPPER
[_
ovEN,BAKE
, the numeric key pads for the temperature
you want (example
for 425°F press
14/,:,2)',
_
and then
..
\5_J)
press START _
TWICE (for Jewish Holidays only). Remember that
the oven control will no longer beep or display any further changes once the oven is set
for the Sabbath feature.
8. The oven may be turned OFF at any time by pressing CANCEL @ pad (this will turn the
oven OFF only). To turn OFF the Sabbath feature press and hold both the HI h + and LO Io pads
for at least 3 seconds. SAb will disappear from the display.
Should you experience a power failure or interruption, the oven will shut off. When power is
returned the oven will not turn back on automatically. SF (Sabbath Failure) will be displayed in
the oven control display and the surface element displays. The oven will remember that it is set
for the Sabbath and the food may be safely removed from the oven while still in the Sabbath
feature, however the oven cannot be turned back on until after the Sabbath. After the Sabbath
+
observance turn OFF the Sabbath feature. Press and hold both the HI hi and LO Io pads for at
least 3 seconds. SAb will disappear from the display and the oven may be used with all normal
functions. For further assistan ce, guidelines for proper usage, and a complete list of models with
the Sabbath feature, please visit the web at http:\\www.star-k.org.
Notes for the use of the cooktop in Sabbath mode:
* When the Sabbath feature is enabled on the oven control, it is also enabled on the cooktop.
To activate the Sabbath feature, it is not necessary to have one burner ON, but it is necessary
to have a Bake function active in the oven.
= When the Sabbath feature is enabled, a surface element can be turned ON by pressing the
ON/OFF pad. The element will turn ON 15 to 30 seconds after the ON/OFF pad was pressed.
* When the Sabbath feature is enabled, the power level of an active element can be changed.
The change will take effect after a 15 to 30 seconds delay. The element size (inner/outer)
CAN NOT be changed.
= All surface element displays will show"Sb" regardless of if the element is ON or OFF. All red
rings will be illuminated, regardless of the burner size.
Hide quick links:
Advertisement
Table of Contents
