Advertisement
E. Level wine cellar
Wine cellar must be level to assure
proper performance and prevent
tipping.
F. Check operation
1.
Check that you:
Did not skip any steps.
Installed all parts.
Leveled wine cellar.
Have all the tools you started with.
Part No. 4344601
©1996 KitchenAid.
®Registered Trademark of KitchenAid, U.S.A.
1.
Move wine cellar close to its final
location. Remove cardboard or hardboard
from under wine cellar.
2.
Plug power supply cord into
grounded outlet. Slide wine cellar into
final position. Turn power supply on.
3.
Read the Use and Care Guide to fully
understand your new wine cellar.
If wine cellar does not operate properly,
check the following:
Power supply cord is plugged in.
House fuse is intact and tight; or
circuit breaker has not tripped.
Prepared by KitchenAid, Benton Harbor, Michigan
2.
Check levelness of wine cellar by
placing a level on top of wine cellar, first
side to side, then front to back. If wine
cellar is not level, turn wine cellar legs
clockwise to raise wine cellar;
counterclockwise to lower it.
Need assistance or service?
Call a KitchenAid-authorized service
company. To get the name and
telephone number of your nearest
KitchenAid-authorized service company:
• Call the dealer from whom you
purchased the appliance; or
• Check the Yellow Pages of your
telephone directory under "Appliances
— Household — Major — Service or
Repair;" or
• Call the KitchenAid Consumer
Assistance Center toll-free telephone
number: (800) 422-1230.
When you call, you will need the wine
cellar model number and serial
numbers. Both numbers are on the
model/serial rating plate located on the
inside right wall of the wine cellar
cabinet.
leveling
leg
Printed in U.S.A.
Advertisement
