Advertisement
Tool Use and Care
•
•
Use clamps or other practical way to secure
and support the workpiece to a stable plat-
form. Holding the work by hand or against your
body is unstable and may lead to loss of control,
•
Do not force tool. Use the correct tool for your
application. The correct tool will do the job better
•
and safer at the rate for which it is designed.
•
Do not use tool if switch does not turn it on or
off. Any tool that cannot be controlled with the
switch is dangerous and must be repaired
Service
•
Disconnect the plug from the power source
•
before making any adjustments, changing
accessories, or storing the tool. Such preven-
tive safety measures reduce the risk of starting the
tool accidentally.
•
Store idle tools out of the reach of children and
other untrained persons.
Tools are dangerous in
the hands of untrained users.
•
Maintain tools with care. Keep cutting tools
injury.
sharp and clean. Properly maintained tools with
sharp cutting edges are less likely to bind and are
easier to control.
Check for misalignment or binding of moving
parts, breakage of parts, and any other condi-
tion that may affect the tool's operation. If
damaged, have the tool serviced before using.
Many accidents are caused by poorly maintained
tools.
Use only accessories that ere recommended
by the manufacturer for your model. Accesso-
des that may be suitable for one tool may become
hazardous when used on another tool.
Tool service must be performed only by quali-
fied repair personnel. Service or maintenance
performed by unqualified personnel could result in
a risk of injury.
•
When servicing a tool, use only identical
replacement parts. Follow instructions in the
Maintenance section of this manual. Use of
unauthorized parts or failure to follow Maintenance
Instructions may create a risk of electric shock or
3
Advertisement
