Shoulder Strap Adjustment - Craftsman 358.797290 Operator's Manual

• Align the lower vacuum tube as
shown. Push lower vacuum tube into
upper vacuum tube.
Upper
Lower
Vacuum Tube
• Insert a screwdriver intothe latch
area on the vacuum inlet cover.
.,p_.. Blower
Outlet
Latch Area
Vacuum
Inlet Cover
• Gently tilt the handle of the screwdriv-
er toward the back of the unit while
pulling up on the vacuum inlet cover
with your other hand.
• Hold the vacuum inlet cover open un-
til upper vacuum tube is installed.
Vacuum Inlet
Retaining Post
Vacuum
Inlet
Cover ....._q
• Place the hooks on the vacuum tube
on the retaining posts; pivot tube into
position. Secure vacuum tube by
tuming the knob clockwise until tight.
Hooks
• When conva_ng back to the blower
feature, make sure latch on the vacu-
um inlet cover is securely fastened.
SHOULDER STRAP ADJUSTMENT
(for vacuum use only)
• Hold the unitas shown.
• Pass the shoulder strap over your
head and onto your left shoulder.
• Snap the hook onto the retainer on
the top handle.
• Extend you right arm toward the rear
of the vacuum bag.
• Adjust shoulder strap until the vacu-
um bag/shoulder strap seam lies be-
tween your thumb and index finger.
• Make sure air flows freely from the
elbow tube into bag. If bag is kinked,
the unit will not operatar properly.