Equaliser Settings; Function Test; Scope Of Supply - Nokia 610 User Manual

Equaliser settings

GSM antenna (Pos.7)
(not included in the scope of supply)
Your car kit phone is designed to be connected to an external
GSM antenna. However, if your car is equipped with a
compatible radio/GSM antenna with a frequency separating
filter, this may be used instead.
If your car does not come with a GSM antenna, please contact
your dealer for information on the best location for mounting
and for the relevant installation guidelines.
Equaliser settings
Your car kit phone supports a variety of options for output over
a loudspeaker:
Direct connection to the SP-2 loudspeaker supplied in the
p
sales package.
Connection to a compatible car radio loudspeaker over an
p
additional relay that switches audio output over to the
loudspeaker (not included in the scope of supply).
Connection to the compatible car radio loudspeakers via the
p
line-in input of your car radio. You will need to adjust the
audio level suitably if this option is selected.
To make the desired settings, select the
a
Scroll with to the item
a
to select it.
Scroll with to the desired option and press
a
select it.
68
©
Copyright 2004 Nokia. All rights reserved.
Settings menu.
Equaliser settings and press
to

Function test

After your car kit phone has been installed, it needs to be
checked to ensure that it is working properly. When testing the
operation of the equipment, also check that it has been
mounted so that it in no way impairs the driver during
operation of the vehicle.
To make a wireless connection between your car kit phone
x
and a compatible accessory with Bluetooth technology,
ensure that the devices are within the range necessary for
Bluetooth transmission. Remember that external devices
need to be supplied with sufficient power for this feature
(check the battery pack).

Scope of supply

Radio unit TFE-4
p
Display SU-11
p
Input device CUW-3
p
Loudspeaker SP-2
p
Microphone HFM-8
p
System cable PCU-4
p