Craftsman 919.165382 Owner's Manual page 3

Model No. 919.165382
Running HP 1.0
Bore 2-7/8"
Stroke 1-1/4"
Voltage-Single Phase 120V
Minimum Branch Circuit Requirement 15 amps
Fuse Type Time Delay
Air Tank Capacity 6
Approx. Cut-In 120
Approx. Cut-out 150
SCFM @ 40 psig 3.7
SCFM @ 90 psig 2.6
Refer to Glossary for abbreviations.
_"Y;I ; i=lll'J [_1]1_] =llll_l_-"]I m]_l_lid[o]_- _]
This manual contains information that is important for you to know and
understand. This information relates to protecting YOUR SAFETY and
PREVENTING EQUIPMENT PROBLEMS. To help you recognize this
information, we use the symbols below. Please read the manual and pay
attention to these symbols.
_ Indicates an
imminently hazardous
situation which, if not avoided, will result
in death or serious iniurv,
Indicates a potentially
_ hazardous situation
which, if not avoided, could result in
death or serious iniurv.
_U_lJ_ Indicates a potentially
hazardous situation
which, if not avoided, _ result in minor
or moderate iniun/.
:lefyWa' hrtly h o,
indicates a potentially hazardous situation
which, if not avoided, may result in
property damaqe.
_Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicals known (to the State of California) to cause cancer, birth defects
or other reproductive harm. Some example of these chemicals are:
• lead from lead-based paints
• crystalline silica from bricks and cement and other masonry products
• arsenic and chromium from chemically-treated lumber
Your risk from these exposures varies, depending on how often you do
this type of work. To reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety equipment, always
wear MSHA/NIOSH approved, properly fitting face mask or respirator when
using such tools.
When using air tools, basic safety precautions should always be followed
to reduce the risk of of personal injury.
3-ENG A17298