1060 Backup Battery - Lenovo ThinkPad X200s Hardware Maintenance Manual

Table 13. Removal steps of palm rest (continued)
When installing:
1. In models with the fingerprint reader, attach the fingerprint reader connector firmly to the system board.
2. Press the left and right top edges of the palm rest to fit it into place.
3. Push the front side of the palm rest until it clicks into place.
4. Close the LCD cover and turn the computer over. Then fasten the five screws to secure the palm rest.

1060 Backup battery

DANGER
Use only the battery specified in the parts list for your computer. Any other battery could ignite
or explode.
For access, remove these FRUs in order:
• "1010 Battery pack" on page 71
• "1040 Keyboard" on page 77
• "1050 Palm rest or palm rest with fingerprint reader" on page 80
82
Hardware Maintenance Manual
1
2
2
1