Lenovo ThinkPad X200s Hardware Maintenance Manual page 103

Table 22. Removal steps of base cover assembly for ThinkPad X200, X201, and X201i (continued)
5 6
In step and , remove the system board, the DC-in connector, and the fan assembly together from the base
cover assembly.
When installing:
a
Check the position of the wireless switch , and firmly fit the system board into the base cover assembly.
Note: Following step is only for ThinkPad X201 and X201i.
Cable routing:
Route the speaker cable as shown in this figure.
97
.
Chapter 8 Removing and replacing a FRU