Lenovo ThinkPad X200s Hardware Maintenance Manual page 66

Table 7. Status indicators
Indicator
1
Sleep (standby)
status
2
AC power status
3
Battery status
4
Power on
5
Drive in use
6
Caps lock
7
Num lock
8
Wireless WAN
status
60
Hardware Maintenance Manual
Meaning
Green:
Blinking green:
Green:
Green:
Blinking green:
Orange:
Blinking orange (slow):
Blinking orange (rapid):
Green:
Green:
Note: Do not move the system while the green drive-in-use light is on. Sudden physical
shock could cause drive errors.
Green:
Green:
Green:
Blinking green:
The computer is in sleep (standby) mode.
The computer is entering sleep (standby)
mode or hibernation mode, or is
resuming normal operation.
The computer is connected to the ac
power supply.
The battery is charged between 80%
to 100% of the capacity, and being
discharged between 0% to 80% of the
capacity.
The battery is charged between 20% to
80% of the capacity, and being charged.
The battery is charged between 5%
and 20% of the capacity, and being
discharged.
The battery is charged between 5% to
20% of the capacity, and being charged.
The battery is charged between 0% to
5% of the capacity.
The computer is on and ready to use.
This indicator stays lit whenever the
computer is on and is not in sleep
(standby) mode.
Data is being read from or written to the
hard disk drive, the diskette drive, or the
drive in the Serial Ultrabay Slim device.
When this indicator is on, do not put the
computer into sleep (standby) mode or
turn off the computer.
Caps Lock mode is enabled. To enable
or disable Caps Lock mode, press the
Caps Lock key.
The numeric keypad on the keyboard
is enabled. To enable or disable the
keypad, press and hold the Shift key,
and press the NumLk (ScrLk) key.
The wireless WAN is on, and the radio
link is ready for use, or the data is being
transmitted.
Data is being transmitted (for some
models).