Custom Protocol Command Codes Download - Oki OKIPOS X400 Manual

Command Structure <ESC>LD,a,b,c,d,e,f,g,h,i
Command Function Allows the user to define custom Protocol Command codes.
Input to Printer
Printer Output
Special Notes 1.
Custom Protocol Command Codes
a = Replacement character for STX in ASCII or hex format
b = Replacement character for ETX in ASCII or hex format
c = Replacement character for ESC in ASCII or hex format
d = Replacement character for ENQ in ASCII or hex format
e = Replacement character for CAN in ASCII or hex format
f = Replacement character for NULL in ASCII or hex format
g = Replacement character for OFFLINE in ASCII or hex format
Example: <ESC>LD,{,},%,#,&,*,~,0,0
Placement: Immediately following the <ESC>A Start command and in an
Independent data stream.
Default: Standard Protocol command Codes
<ESC>A
<ESC>LD,{,},%,#,&,*,~,0,0
<ESC>Z
A Protocol Command code status label will be printed as a result of the
successful download of a custom set of Protocol Command codes.
STX=7B ETX=7D
NULL=2A OFFLINE=7E
Commas must be used to separate the parameters. If a parameter is omitted
between two commas, the default Non-Standard Protocol Command codes for
that parameter will be used.
Download
ESC=25
89