Characters, Custom-Designed ．．．．．．．．．．．．．．．．．22 - Oki OKIPOS X400 Manual

Command Structure Store Command :
Command Function To allow for the creation, storage, and printing of custom characters, such as
Input to Printer
Character, Custom-Designed
Recall Command:
a = 1 16x16 matrix
2 24x24 matrix
b = Specifies the character encoding method for the data stream
H hexadecimal characters
B Binary characters
If B is specified than both 90 and cc codes are represented by one
byte code separately.
cc = Code to store/recall the character. Valid code ranges are 21H to
52H in Hex or "!" to "R" in Binary.
(data) = Data to describe the character image either in Hex or Binary
format.
Example: <ESC>T1H3F
<ESC>K1H903F
See Appendix C for a more detailed explanation.
Placement: The Store command is typically sent in its own data stream to the
printer, between the Start/Stop commands. The Recall command is
sent in a secondary data stream to print the character, and follows
any necessary position or Size commands.
Default: None
special fonts or logos. Up to 50 individual characters may be stored in the cus-
tom character volatile memory.
See Appendix C for a detailed explanation.
<ESC>A
<ESC>T1H3F0100038007C00FE01FF03FF87FFCFFFE07C007C007C007C00
7C007C007C007C007C00
<ESC>Z
<ESC>Tabcc
<ESC>Kab90cc
22