Roll Feeder; Face-Down Stacker; Face-Up Stacker; Duplex Unit (If Installed) - Oki PRO510DW User Manual

R F
OLL EEDER
The roll feeder is used for media sizes additional to those of the
standard tray, heavier media weights and special media.
The roll feeder can handle the same sizes as the tray, in roll format.
The roll feeder can feed paper widths as small as 3in (76.2 mm) and
lengths up to 300 ft (91.4m).
F -
ACE DOWN STACKER
The face-down stacker on the top of the printer can hold up to 500
cut sheets of 20 lb (80 g/m²) standard paper, and can handle paper
stocks from 17 – 57 lb (64 – 216 g/m²). Pages printed in reading
order (page 1 first) will be sorted in reading order (last page on top,
facing down).
F -
ACE UP STACKER
The face-up stacker should be opened and the tray extension pulled
out when printing continuous media. (With the face-up stacker
either open or closed, the driver setting of Face Down will
successfully direct prints to the Face-Down stacker.)
D (
UPLEX UNIT IF INSTALLED
This option provides automatic two-sided printing on plain paper fed
from Tray 1. Applicable paper sizes are A6, A5, B5, B5LEF,
Executive, A4, A4LEF, Letter, LetterLEF, Legal 13 in, Legal 13.5 in,
Legal 14 in, B4, Tabloid, Tabloid Extra, A3, A3 Wide, A3 Nobi,
Custom size (3.9 – 12.9 in wide, 5.8 –18 in long), using paper
stocks in the range 20 – 32 lb (75 – 120 g/m²).
)
User's Guide> 28