Oki OKICOLOR8 Quick Start Manual page 27

To ensure optimum print quality, you should set the color
registration on a routine basis (once a month or so).
It is also recommended that you set the color registration
when you change toner or image drums, when you load paper
in the paper tray, or if you move the printer.
To set the color registration:
1 Open the Color Registration Utility: click Start
®
Programs OKICOLOR 8
Registration Utility.
2 Make sure OKICOLOR 8 on LPT1: (or OKICOLOR 8
PS on LPT1:) is highlighted in the box (if you are using a
port other than LPT1:, make sure that port is highlighted).
3 From the list, select the tray you want to calibrate.
®
®
OKICOLOR 8 Color
4 Click Print Color Calibration page.
The printer prints a color test page with 9 sections, each
with a series of lined boxes in it.
Lined Boxes
Lined Box Numbers
Section #1
List Box
|
Quick Start 27