Oki OKICOLOR8 Quick Start Manual page 15

2 Remove the oil roller from its packaging. Turn it over and
take a quick look at the gear end of the unit: if you see a
blue shipping retainer (1), remove it.
3 Holding the oil roller by the fins with the caution label
facing you, lower the oil roller into the fuser unit, sliding
the left end under the retaining ledge (1).
4 Make sure the blue lever is toward the back of the printer,
then lower the right end of the oil roller into the fuser unit
and pull the lever forward to lock the oil roller in place.
5 Close the cover.
|
Quick Start 15