Usb Problems; Cannot Configure For Usb Connection - Oki MPS6150c User Manual

USB Problems _____________________

Cannot configure for USB connection

Windows NT 4.0 does not support USB. Windows
98 upgraded from Windows 95 may not support
USB.
Possible cause
USB cable does not meet
specifications.
Interface is disabled.
Configuration procedure
was not correctly
followed or cancelled.
USB cable is
disconnected or faulty.
A USB hub is being used. The printer cannot be used with a USB hub.
The USB cable is
installed in the Ethernet
port.
NOTE
Remedy
Use USB cable to specification Ver.2.0.
Check that USB interface is set to Enable in
the menu (USB MENU → USB → ENABLE).
Configure again from the beginning.
Reconnect or try another cable.
Connect the printer and computer directly.
Make sure the USB cable is plugged into the
black USB port (1) on the printer:
c52_usb_2_crop.jpg
MPS6150c User's Guide
141