Oki MPS6150c User Manual page 198

using Profile Assistant. See "Using Profile Assistant" on
page 196.
Once the profile(s) have been downloaded, make the
appropriate selections in the printer driver. These are
described in the next section (Windows page 198, Mac OS 9
page 198. Mac OS X page 199).
Windows
This information applies to the Windows PCL and PostScript
drivers.
1. To match the color of an input RGB device such as a
monitor, scanner or digital camera, make the following
selections in the printer driver:
2. On the printer driver [Color] tab, select [Graphic Pro]
and click [Options].
3. Select [ICC Profile color Matching].
4. Select the ICC profile that corresponds to the device you
are trying to match such as your monitor, scanner or
digital camera.
Remember that the names "RGB Source 1", "RGB
Source 2" and so on relate to the number assigned to the
profile using Profile Assistant. See "Using Profile
Assistant" on page 196.
5. Select a Printer Output Profile.
If [Auto] is selected, the factory default profiles that are
embedded in the printer will be used. If you have created
a printer profile yourself using profile creation software,
select it here.
Tip—If you have selected your own printer output profile,
you will also be able to adjust the rendering intent.
Mac OS 9
1. In your application program, choose [File] → [Print].
2. From the [Printer] menu, select your printer model.
3. Select [Color Options].
4. From the [Color Mode] menu, select [Graphic Pro].
5. Select [Color – Graphic Pro 1].
6. From the [color Matching Task] menu, select [ICC Profile
color Matching].
MPS6150c User's Guide
198