Network Install: Software; Install The Drivers; Tcp/Ip - Oki ES1220n Install Manual

Network Install: Software

TCP/IP

Installing a printer on a network is best handled by
Note:
someone familiar with networks (such as a network
Administrator).
For more detailed information on the OkiLAN
8100, see the OkiLAN 8100 User's Guide on the
CD supplied with your printer.

Install the Drivers

The IP Address
An IP address is required to install the drivers. If you are
using DHCP, the IP address will automatically be detected.
If you are not using DHCP, you need to obtain the IP
Address from your network Administrator and enter it using
the front panel:
+
Press until you see
•
NETWORK MENU
press .
ENTER
+
Press until you see
•
IP ADDRESS SET
+
Press to change the setting to
•
, then .
ENTER BACK
+
• Press (
IP ADDRESS APPEARS)
+ –
Use the and to set each set of digits in the IP Address,
•
pressing to go to the next set of digits.
ENTER
Press , then press
• BACK
To Install the PostScript Emulation Driver
□
Insert the Drivers CD supplied with your printer into the
CD-ROM drive.
□
The License Agreement appears. Click Next.
□
The Menu Installer window appears. Click Next.
□
Click the Printer Driver Installer button.
□
The Local or network printer screen appears. Select
Network Printer. Click Next.
□
The Connection type screen appears. Select Directly to
the network ... and click Next.
□
The TCP/IP Connection screen appears. Follow the
on-screen instructions to complete the installation.
on the display, then
, then press
, and press
MANUAL
, then press ENTER
.
ON LINE
To Install the PCL Driver
Use the Add Printer wizard:
□
Insert the Drivers CD supplied with your printer in your
®
CD-ROM drive.
□
Click Next, then click Cancel.
Click Start → Settings → Printers → Add Printer.
□
The Add Printer Wizard appears.
□
Follow the on-screen instructions.
Note: When prompted to select a port, select LPT1
temporarily.
The PCL driver is located under
\drivers\network\2000_xp\pcl.
□
Click Finish.
Use the Oki LPR Utility to discover the printer:
□
Click Remote Print, then click Add Printer.
.
ENTER
□
Select your printer model from the list, then either enter
the IP Address manually, or click Discover and wait
for the printer to be discovered.
.
□
Click OK.
3