Oki C9800hdn Color Manual page 16

1
1-16 Fiery Color Management
Fiery color print option
Brightness
85% Lightest to 115% Darkest
CMYK Simulation Method
Quick/Full (Source GCR)/Full (Output
GCR)
(Default set at Setup or with ColorWise Pro
Tools)
CMYK Simulation Profile
SWOP-Coated (EFI)/DIC (EFI)/
Euroscale (EFI)/None
(Default set at Setup or in ColorWise Pro
Tools)
Color Mode (Mac OS)
CMYK/Grayscale
or
Print Mode (Windows)
Standard Color/Expert Color/Grayscale
(Other) Gamma
1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/2.6/2.8/3.0
(Default set with ColorWise Pro Tools)
(Other) White Point
5000 K (D50)/5500 K/6500 K (D65)/
7500 K/9300 K
(Default set with ColorWise Pro Tools)
(Other) Phosphors
Hitachi EBU/Hitachi-Ikegami/NTSC/
Radius Pivot/SMPTE/Trinitron
(Default set with ColorWise Pro Tools)
You can specify settings for the following options by selecting print options when you
send a job to the Fiery. Some can also be set as defaults by the administrator during
Fiery Setup or using ColorWise Pro Tools. Settings specified using print options over-
ride the defaults. Some options are only available with Spot-On, which is supplied
with C9800 GA only.
Performs a color adjustment on all color channels to make the printed output
lighter or darker.
Quick simulation applies one-dimensional transfer curves that adjust output
density only. The Full simulations apply colorimetric transformations that
adjust hue as well as output density (see
Adjusts CMYK color data to simulate an offset press standard or a custom
color gamut defined at your site. Choosing None bypasses simulation (see
page 1-23).
Specifies the output color space of the job. Select CMYK, Standard Color, or
Expert Color for a full-color document.
Applies the specified gamma value to the RGB source space definition (see
page 1-22). To use this print option, you must choose Other as the RGB
Source Profile setting.
Applies the specified white point value to the RGB source color space
definition (see
the RGB Source Profile setting.
Applies the specified phosphor (monitor type) information to the RGB source
space definition (see
Other as the RGB Source Profile setting.
C9800 Color Guide - 16
What it does
page
page 1-22). To use this print option, you must choose Other as
page 1-22). To use this print option, you must choose
1-24).