2
2-7 Installing Fiery software and fonts
T
O CONFIGURE THE CONNECTION FOR
1. Start the utility by double-clicking its icon.
2. Click Option.
3. Click Add.
4. Enter the appropriate information for the C9800.
5. When you have entered all the information, click Add.
6. With the device name selected, click OK.
Fiery name and device name
(C9800)
Configuring a connection for Fiery Spooler
Before you begin, print a Configuration page from the Printer Control Panel and note
the IP address of the C9800. See
F
IERY
The Chooser dialog box appears.
—Enter the IP address (or DNS name) of the C9800.
Name
—Enter the name of the device that the Fiery is installed in: C9800.
New Device
This device name appears in the Printer Setup section of the Configuration page.
Type C9800 exactly as shown because the device name is case-sensitive.
N
:
OTE
The C9800 appears in a list of configured servers.
page
2-4.
S
POOLER