How To Use Preferences; Overview Of Preferences - Escort Passport 9500CI Owner's Manual

How to use Preferences

There are 10 user-selectable options you
can customize on your 9500ci. The
buttons labeled VOL and BRT on the
controller are used to enter Preferences.
Once you enter Preferences, the VOL
button is used to REVIEW your current
choices, and BRT button is used to
CHANGE settings. See Pages 14-16 for
more detail.
How to use Preferences
1 To enter Preferences, press and
hold both the VOL and BRT buttons
down for 2 seconds. (The unit will display
Prefs
the word , accompanied by a voice
announcement).
2 Press the VOL button to review the
current settings. (You can either tap the
button to change from item to item, or hold
the button to scroll through the items).
3 Press the BRT button to change any
setting. (You can either tap the button to
change from setting to setting, or hold the
button to scroll through all the options).
4 To exit Preferences, simply wait 8
seconds without pressing any button,
or press the PWR button ( ). (The unit
Complete
will display , accompanied by a
voice announcement).
An example
Here is how you would turn the AutoMute
feature off.
1 Enter Preferences by holding both the
VOL and BRT buttons down for 2 seconds.
Prefs
The 9500ci will beep twice and display
2 Then hold the VOL/RVW button down.
The 9500ci will scroll through the categories,
starting with Pilot , GPS , aLearn , Meter
AutoMute
then .
3 Release the VOL/RVW button when the
9500ci shows the AutoMute item. Since the
factory setting for AutoMute is on, the display
aMute ON
will show .
(If you accidentally don't release the VOL/
RVW button in time, and 9500ci goes to the
next category, simply hold the VOL /RVW
button down again, the 9500ci will scroll
through all of the categories.)
4 Press the BRT/CHG button to change
aMute ON aMute OFF
from to .
5 To exit Preferences, simply wait 8
seconds without pressing any button, or
press the PWR button ( ). The 9500ci will
Complete
display , accompanied by a voice
announcement.
12

Overview of Preferences

Press the VOL button
to go from one category
to the next
(Power-on indication)
.
AUTOLEARN
,
SPEED ALERT
AUTOMUTE
*
Factory Default Settings
To reset 9500ci to its
original factory
settings, press and
hold the "VOL" and
"SENS" buttons
while turning the
power on. The
9500ci's display will MARKERS
Reset
provide a
message, accompa-
nied by an audible
alert, acknowl-
edging the reset.
Press the BRT/CHG button
to change your setting
within a category
PILOT Pilot HWY
* Full word: Highway, AutoScan, etc.
Pilot H Letter: H, A, ANX
Pilot H.> Letter, with scanning dot
Pilot V
Vehicle voltage
Pilot SPD Vehicle speed
GPS
GPS ON * GPS On
GPS OFF
GPS Off
aLrn ON * AutoLearn On
aLrn OFF
AutoLearn Off
sAlrt ON * Speed Alert On
sAlrt OFF
Speed Alert Off
METER
Meter STD * Bar-graph Meter
Meter EXP
Expert Meter
Meter SPC Spec Display
aMute ON * AutoMute On
aMute OFF
AutoMute Off
UNITS
Units ENG * Units English
Units MET
Units Metric
VOICE
Voice ON * Voice Alerts On
Voice OFF
Voice Alerts Off
BANDS
Bands DFT * Factory Default Settings
Bands MOD Factory Default Settings Modified
Turn bands ON or Off by
pressing the MUTE button
X ON OFF
or (default is on)
K ON OFF
or (default is on)
Ka ON OFF
or (default is on)
POP ON OFF
or (default is off)
SWS ON OFF
or (default is off)
LSR RECV SHFT OFF
or or
Mark DFT * Factory Default Settings
Mark MOD Factory Default Settings Modified
rCam ON OFF
or (default is on )
sCam ON OFF
or (default is on)
Trap ON OFF
or (default is on)
Othr ON OFF
or (default is on)
13
(default is RECV)