Escort PASSPORT 9500ix Quick Reference

How To Use Preferences

PASSPORT is ready to go, just plug it in and turn An example
it on, but you can also easily change features for Here is how you would turn PASSPORT's AutoMute
your preferences. There are 10 user-selectable feature off.
Preferences so you can customize your 9500ix
for your specific driving needs. 1 Enter Preferences by holding both the MRK
The buttons labeled "MRK" and "BRT" are and BRT buttons down for 2 seconds. PASSPORT
used to enter Preferences, REVIEW your current will beep twice and display Prefs
settings, and to CHANGE any settings as desired.
The word PREF is located on the top of the 2 Then hold the "BRT" button down. PASSPORT
detector, and is highlighted in colored graphics. will scroll through the categories, starting with Pilot
Pilot sAlrt
Light ( ), then SpeedAlert (
How to use Preferences sequence ( PwrOn ), then Signal strength meter
Meter aMute
1 To enter Preferences, press and hold the ( ), and then AutoMute (
"MRK" and "BRT" buttons down for 2 seconds.
3
The unit will beep twice, and will display the word Release the "BRT" button when PASSPORT
Prefs . shows the AutoMute item. Since the factory setting
is for AutoMute to be on, PASSPORT will display
2 Then press the "BRT" button to review the aMute ON .
current settings. You can either tap the button to If you accidentally don't release the "BRT" button
change from item to item, or hold the button to in time, and PASSPORT goes to the next category,
scroll through the items. simply hold the "BRT" button down again, and after
PASSPORT scrolls through all categories, it will begin
3 Press the "MRK" button to change any again at the top of the list.
setting. You can either tap the button to change
4
from setting to setting, or hold the button to scroll Press the MRK button to change from
through all the options. aMute ON to aMute OFF .
4 To exit Preferences, simply wait 8 seconds 5 To complete choosing your Preferences,
without pressing any button, or press the simply wait 8 seconds without pressing any
power button . The unit will display Complete , buttons, or press the power button
Complete
beep 4 times, and return to normal operation. will display , beep 4 times, and return to
normal operation.
Settings & Preferences
Press the BRT button to go from
one category to the next
Pilot Light
Pilot HWY
(Power-on indication) Pilot H
Pilot H.>
Pilot V
Pilot SPD
.
SpeedAlert sAlrt ON
sAlrt OFF
AutoLearn
aLrn ON
aLrn OFF
), Power-on
Signal Strength Meter Meter STD
Meter EXP
).
Meter SPC
AutoMute aMute ON
aMute OFF
AutoPower aPwr ON
aPwr OFF
Units Units ENG
Units MET
Press and hold the MRK
Voice Voice ON
and BRT buttons to access
Voice OFF
Preferences. To exit
Bands Bands DFT
Preferences, simply wait
Bands MOD
a few seconds without
pressing a button. The unit
will display Completed to
X
confirm your selections.
K
Ka
POP
SWS
. PASSPORT LSR
TSR
Markers Marks DFT
Marks MOD
rCam
sCam
sTrap ON
Othr
*Default Setting
Press the MRK button to change
Notes for Settings & Preferences
your setting within a category
For descriptions of features and functions
available when connected to SmartCord Live
* Full word: Highway or Auto or City
with ESCORT Live visit EscortRadar.com and
Letter: H or A or C
download the SmartCord Live user manual for
Letter, with scanning dot
Vehicle voltage your iOS or Android OS smartphone. Also visit
Vehicle speed
Escort.Radar.com for the complete PASSPORT
* Displays current speed during alert
9500ix Owner's Manual.
SpeedAlert feature off
To view serial number and software
* Automatically locks out false alarms
revision press MRK and MUTE while powering
AutoLearn is off
on detector.
* Standard signal strength meter
ExpertMeter mode

Restoring the Factory Default Settings:

SpecDisplay mode
To restore your PASSPORT to its original factory
* Audio alerts increase automatically
settings, press and hold the "SEN" and "BRT"
Audio alerts are controlled manually
buttons while turning the power on. A
* Turns detector off after 4 hours
AutoPower feature is off message will be displayed, accompanied by an
audible alert acknowledging the reset.
* Speed/distance in English units
Speed/distance in Metric units

Software Updates

* Voice announcements on
Voice announcements off
PASSPORT's red light and speed camera
* Default settings database is easily updated using our exclusive
Bands have been modified
detector software tools found on our web site.
Firmware, or the operating software for the
Turn bands on/off by
pressing the Mute button
detector, can also be updated using these tools.
ON or OFF (default is on) Once registered, you will receive email
ON or OFF (default is on)
notifications that updates are now available for
ON or OFF (default is on)
your database or firmware.
ON or OFF (default is off)
ON OFF
or (default is off)
ON or OFF (default is on)
ON or OFF (default is on)
To install your software and DEFENDER
updates, connect your Max to a computer via
USB/USB Mini B cable to use the software tools.
ON or OFF (default is on)
f you have a laptop computer you can take it
I
ON or OFF (default is on)
out to the vehicle to download the updates.
or OFF (default is on)
ON or OFF (default is on)
Reset
R A D A R

GPS Powered for Speed and Location Intelligence

Pre-loaded DEFENDER Database
• L A S E R • S A F E T Y C A M E R A • D E T E C T O R
Quick Reference