PAGE 49
Testing the Your Connection
It is a good idea to verify that your selected network connection
is functioning properly before exiting the Network Connections
screen.
Follow these steps to test your selected network
connection:
1. Select the TEST CONNECTION button on the
Network Connections screen.
2. Wait for the tests to complete. A check mark next
to each test indicates that it passed while an "X"
indicates that the test failed.
3. Select the RETURN button to return to the previous screen.
If one or more connection tests receive an X, make sure your cables are properly connected and you have properly
setup for Ethernet Settings or Dialup Modem Settings.