Re-Assigning Device Keys - Escient FireBall MP-100 Installation And User Manual

Re-Assigning Device Keys

The Remote can be set up to control a second TV or VCR, or any combination of eight
home entertainment components. For example, to have the Remote control a TV, a Cable
Converter, and two VCRs, you will need to reassign the unused AUX key to operate the
second VCR as follows:
1. On the Remote, press and hold CODE SET until the LED blinks twice, then release
CODE SET .
2. Enter 9 - 9 - 2. The LED will blink twice.
3. Press DVD once, then press AUX once.
4. The AUX key is now ready to be programmed for your VCR. See Programming
Component Control. To reassign other device keys, repeat steps 1 through 4 by
substituting the key sequence from the below chart for the most popular components:
To Re-Assign Key Sequence
TV as VCR key:
TV as 2nd CBL key:
TV as 2nd AUX key:
TV as 2nd RCV/TNR key:
TV as AMP key:
TV as CD key:
TV as SAT key:
Perform
CODE SET - 9 - 9 - 2 - DVD - TV
CODE SET - 9 - 9 - 2 - CBL - TV
CODE SET - 9 - 9 - 2 - AUX - TV
CODE SET - 9 - 9 - 2 - RCV - TV
CODE SET - 9 - 9 - 2 - PP - TV
CODE SET - 9 - 9 - 2 - TB - TV
CODE SET - 9 - 9 - 2 - FB - TV
F B -MP I & U '
IRE ALL NSTALLATION SER S
2
You cannot re-assign the FB, TB,
or PP keys.
However, the keys can be used
in conjunction to re-assigning
other device keys.
A
PPENDIX
G - M22002-01A1
UIDE
H - R C
EMOTE ONTROL
P 144
AGE