Serial Com Ports - Escient FireBall MP-150 User Manual

Escient fireball mp-150 media players: user guide

Hide thumbs Also See for FireBall MP-150:

Table of Contents

PAGE 67

SERIAL COM PORTS

The Serial Control COM Port setting is used to specify which RS-232 serial COM port is to be used

for two-way external control communications with a third party control system.

If there are no available COM ports, you must use the Ethernet based external control for two-way

external control communications with a third party control system.

Follow these steps to select which serial port to use for external control:

1. Press the Setup key on the remote to display the FireBall setup menu.

2. Select the External Control menu item.

3. Select the IR & Serial menu

4. Select the Serial Control COM Port menu item.

5. Select which serial port to use for external control.

Table of Contents