HP XP P9500 Release Note page 6

Table 7 Restrictions (continued)
# Restrictions
6 Do not specify the following values to the DADID of a Disk Configuration Definition, a copy group and a route list.
Specifying those values may cause the information displayed in Discover HP Storage Arrays panel to become
incorrect.
"R"
"CMD"
"I"
"K"
"RC"
Example that cannot be specified
"R"
"xx.R"
"R.xx"
"xx.R.xx"
where xx is an arbitrary string of one or more characters.
7 The following features cannot be used with P9500.
4x4x4 Cascade configuration
Specification differences from previous versions
This section describes the specification differences between V6.6 and V6.6.1 of BCM.
CLI commands
Table 8 Overall
Item
YKIMPORT
YKQRYDEV
YKSCAN
6 Fixes
Specification in V6.6
None
None
None
New Specification in V6.6.1
CAPACITY parameter is
available (default). When
checks a volume, specify
CAPACITY (CHECK)
parameter. When not checks
volume, specify CAPACITY
(NOCHECK).
The capacity of volume
(cylinder) is obtained.
The capacity of volume
(cylinder) is obtained.
Version
6.6.1-00