Prerequisite Conditions - HP XP P9500 Release Note

Table 14 Disk space requirements (continued)
Files to be installed
HPQSYPNLT
HPQSYMSGT
HPQSYTABT

Prerequisite conditions

The following tables show prerequisite conditions for 4x4x4 Multi-Target configuration with Delta
Resync.
Table 15 Prerequisite hardware
Item
Host
Storage System
Inter-DKC link (physical path)
Table 16 Prerequisite software
Item
z/OS or OS/390 V2R10
BCM
10 Prerequisites
Required space (in unit of tracks*1)
60 tracks
5 tracks
5 tracks
Description
Primary site: 1 host
Local site: 1 host if operation is to be
performed from the Local site.
Remote site: 1 host if operation is to be
performed from the Remote site.
Primary site: 1 or more
XP12000/XP10000,
XP24000/XP20000, or P9500 disk
arrays
Local site: 1 or more
XP12000/XP10000,
XP24000/XP20000, or P9500 disk
arrays
Remote site: 1 or more
XP12000/XP10000,
XP24000/XP20000, or P9500 disk
arrays
Primary site <—> Local site: Fibre
Channel, bi-directional.
Primary site <—> Remote site: Fibre
Channel, bi-directional.
Local site <—> Remote site: Fibre
Channel, bi-directional.
Arbitration path in remote site: Fibre
Channel, single direction from the
supervisor DKC to each subordinate
DKC.
Description
Versions supported by BCM V6.6.1
V6.6.1
Basic License
Cnt Ac-J 4x4 Extended CTG License
Number of directories
200
5
5
Remarks
z/OS or OS/390 should be installed.
Arbitration paths must be set up with
Remote Web Console.