HP StorageWorks XP1024 - Disk Array Owner's Manual page 56

Caution
56
Table 10. Connections to the XP1024 Disk Array
Callout in
figure 10
(page 55)
1
2
3
The specific hardware requirements for your Device Manager server, such
as the required processor speed, storage capacity, and memory, vary
depending on the optional software that you use and the number of disk
array frames you have connected to the system.
To protect your user's security, neither edition of HP Command View
software for the Device Manager server (CVXP or CVXP AE) has access
to any user data stored on the disk array.
There is no single point of failure in the disk array. It is designed with
redundant logic assemblies, disk drives, and the power supplies, all of
which can be removed or replaced without interrupting access to your data.
Only your HP service representative can remove or replace hardware.
HP StorageWorks Disk Arrays XP128/XP1024 Owner's Guide
Connecting
A DKC to a DKU;
A DKU to another DKU
The DKC to the server host
DKC to the Management
Console
Type
Fibre Channel
Fibre Channel
ESCON
FICON
iSCSI
LAN