Configuring The Fibre Channel Ports; Host Group Mode (Option) - HP StorageWorks XP10000 - Disk Array Configuration Manual

The following host group mode (option) is available for Linux:
Table 1 Host group mode (option)
Host
Group Function
Mode
7 Reporting Unit Attention when adding LUN
CAUTION:
Changing host group modes for ports where servers are already installed and configured is disruptive
and requires the server to be rebooted.

Configuring the Fibre Channel ports

Configure the disk array Fibre Channel ports by using XP Remote Web Console (shown) or XP
Command View Advanced Edition Software. Select the settings for each port based on your storage
area network topology. Use switch zoning if you connect different types of hosts to the array through
the same switch.
Default Comments
Previously MODE249
Inactive
XP Disk Array Configuration Guide for Linux 11