Hp Xp10000 Control Panel Components - HP StorageWorks XP10000 - Disk Array Owner's Manual

Figure 2 HP XP10000 control panel components
Table 3 HP XP10000 control panel components
Item Label
1 READY
2 ALARM
22 HP XP10000 hardware components
Indicator Description
During normal operation, this LED should be on.
ON: Input/output on the channel interface is
LED (Green)
enabled.
OFF: The system is not accepting data.
During normal operation, this LED should be off.
ON: One or more of the following:
The DC is under voltage.
The DC is over current.
The temperature is abnormally high.
An unrecoverable failure has occurred.
LED (Red)
If the disk array is set up with remote support;
your HP support representative is notified
automatically. If the disk array is not set up with
remote support, place a service call to HP to have
the message evaluated to determine if any action
is required.
BLINKING: The DC is under voltage.