Supported Operating Systems - HP StorageWorks XP10000 - Disk Array Owner's Manual

Feature
Maximum hard disk drives
Maximum spare disk drives
Maximum parity groups/array
Maximum disk drive capacity
Maximum cache
Available hard disk drive
Maximum shared memory
MIX pairs
CHIP pairs
Maximum host ports
1
RAID level
Maximum LDEVs
Maximum LUNs
Maximum LUNs per port
1
Mixed RAID levels are supported in a disk unit.
Specifications are subject to change without notice. Contact HP for the firmware required to achieve
the maximum number of LDEVs.

Supported operating systems

The disk array supports the following operating systems:
• HP-UX
• Linux
• Windows
• HP OpenVMS
• HP Tru64
• Sun Solaris
• IBM AIX
• Novell NetWare
• SGI IRIX64
16 Overview of the HP XP10000 Disk Array
Specification
120 in one rack, 240 in two racks
16
59
69.2 TB
64 GB
73 GB 15,000 RPM FC
146 GB 10,000 RPM or 15,000 RPM FC
300 GB 10,000 RPM or 15,000 RPM FC
400 GB 10,000 RPM or 15,000 RPM FC
6 GB
1 pair
1 pair, available in FC, iSCSI, NAS, FICON, ESCON
48 FC
RAID 1 (2D+2D or 4D+4D)
RAID 5 (3D+1P or 7D+1P)
RAID 6 (6D+2P)
16,384 for OPEN systems; 65,536 for mainframes (OPEN system
LDEVS must be in first 16K; mainframe LDEVS may occupy any
part of the available range.)
49,152
1024