Setting The Maximum Number Of Volume Groups Using Sam - HP StorageWorks XP10000 - Disk Array Configuration Manual

Storageworks xp disk array configuration guide for hp-ux

Hide thumbs Also See for StorageWorks XP10000 - Disk Array:

Table of Contents

To configure the newly-installed disk array devices:

Select Disks and File Systems, then select Disk Devices.

Verify that the new disk array devices are displayed in the Disk Devices window.

Select the device to configure, select the Actions menu, select Add, and then select Using the

Logical Volume Manager.

In the Add a Disk Using LVM window, select Create... or Extend a Volume Group.

In the Create a Volume Group window, enter the name of the new or existing volume group to

assign the new device to, and then click OK twice. The Add a Disk Using LVM window now

displays the volume group name.

Select Add New Logical Volume to open the Create New Logical Volumes window.

In the Create New Logical Volumes window, enter the name, size in megabytes, and mount

directory for the new logical volume. Select Add, and then click OK twice.

Repeat steps 3–7 for each new disk device on the disk array.

Setting the maximum number of volume groups using SAM

The HP-UX kernel specifies the maximum number of volume groups that can be created. The default

is 10. You may need to change this number to accommodate new devices on the disk array. To

change this number, use the Kernel Configuration function.

To change the maximum number of volume groups:

Select the Kernel Configuration function, then select Configurable Parameters.

In the Configurable Parameters window, select the maxvgs parameter, select the Actions menu,

and then select Modify Configurable Parameter.

In the Modify Configurable Parameter window, enter the desired maximum number of volume

groups in the Formula/Value field, and then click OK.

Reference information for the HP System Administration Manager (SAM)

Table of Contents