Creating The File Systems - HP StorageWorks XP10000 - Disk Array Configuration Manual

3. Use the lvdisplay command to verify that the logical volume was created correctly.
Example
# lvdisplay /dev/vg06/lvol1
- - - Logical volume - - -
LV Name
VG Name
LV Permission
LV Status
Mirror copies
Consistency Recovery
Schedule
LV Size (Mbytes)
Current LE
Allocated PE
Stripes
Stripe Size (Kbytes)
Bad block
Allocation
4. Repeat above steps for each logical volume to be created.
You can create only one logical volume at a time. However, you can verify multiple logical
volumes at a time.

Creating the file systems

Create the file system for each new logical volume on the disk array. The default file system types
are:
HP-UX OS version 10.20 = hfs or vxfs, depending on entry in the /etc/defaults/fs file.
HP-UX OS version 11.0 = vxfs
HP-UX OS version 11.i = vxfs
/dev/vg06/lvol1
/dev/vg06
read/write
available/syncd
0
MWC
parallel
2344
586
586
0
0
on
strict
XP Disk Array Configuration Guide for HP-UX 25